Cartier does not publish lug widths. Case dimensions, yes — 36 mm, 33.7 × 25.5 mm — but not the one number you actually need when you are buying a strap. So the information exists only where somebody has done the work watch by watch.
This is that work, collected in one place. Below is the strap width for every Cartier family we make straps for, together with the sizes we know are contested and the ones you genuinely have to measure yourself.
Two rules before the tables. Go by your case size and reference number, never by the model name — most Cartier families run three or four sizes in the same shape, and they are indistinguishable in a photograph. And where we are not certain, this page says so rather than guessing.
Santos de Cartier
| Model | Case | Strap width |
|---|---|---|
| Santos de Cartier Medium | 35.1 mm | 19 mm |
| Santos de Cartier Large | 39.8 mm | 21 mm |
| Santos de Cartier Chronograph | 43.3 mm | 23 mm — not currently stocked |
All modern Santos references use Cartier's QuickSwitch fitting, so strap changes are tool-free. The Skeleton references share the Large case and take 21 mm.
If your Santos has chronograph sub-dials, it is the 43.3 mm case and needs 23 mm, which we do not currently make. Worth knowing before you order rather than after.
Santos-Dumont
| Model | Case | Strap width |
|---|---|---|
| Santos-Dumont Small | 27.5 × 21.2 mm | 15.5 mm |
| Santos-Dumont Large | 31.4 × 43.5 mm | 18 mm — see note |
| Santos-Dumont XL | 46.6 × 33.9 mm | 19 mm |
⚠️ The Large is the one size on this page we are not fully settled on. Our product range and our existing guides use 18 mm, and that is what most owners order successfully. Several independent measurements put it at 17 mm. If you own the Large, measure between the lugs before ordering — it costs you thirty seconds and we would rather you did.
Santos 100
| Model | Case | Strap width |
|---|---|---|
| Santos 100 Medium | 44.2 × 35.6 mm | 20 mm |
| Santos 100 XL | 51.1 × 42.6 mm | 23 mm |
| Santos 100 XL Chronograph | ~51 × 42 mm | 24.5 mm |
"Santos 100" means the XL to most people, so 23 mm is ordered by mistake constantly. If your watch has sub-dials, you are on 24.5 mm.
Ballon Bleu de Cartier
| Case | Strap width |
|---|---|
| 28 mm | 14 mm |
| 33 mm | 16 mm |
| 36 mm | 18 mm |
| 42 mm | 20 mm |
| 40 mm | measure — see below |
The ladder is clean and it holds across steel, gold and diamond-set references alike — a 33 mm rose gold Ballon Bleu with a diamond bezel takes exactly the same 16 mm as a plain steel one.
⚠️ The 40 mm is the exception and we will not guess at it. Sources disagree because they are measuring different things: the outer gap between the lugs and the narrower opening the strap end actually passes through are not the same number on this case, and published figures mix the two. Measure yours, or ask your watchmaker.
Tank
| Model | Case | Strap width |
|---|---|---|
| Tank Must / Tank Louis Cartier — Small | 29.5 × 22 mm | 16 mm |
| Tank Must / Tank Louis Cartier — Large | 33.7 × 25.5 mm | 19 mm |
| Tank Must XL | — | 23 mm |
| Tank Solo Small | 31 × 24.4 mm | 17.5 mm — a half size, see below |
| Tank Solo Large | — | 20 mm |
| Tank Solo XL | — | 23 mm |
| Tank Américaine | — | 18 mm on the references we have verified |
| Tank MC | 34.3 × 44 mm | 25 or 26 mm — see below |
⚠️ The Tank Solo Small is a genuine half size and we want to be straight about it. Its lugs measure 17.5 mm, which is not a width anyone makes as standard — including us. Your two options are both compromises: an 18 mm strap has to be squeezed in and will not sit properly if it is a thick one, and a 17 mm strap leaves a visible half-millimetre gap at each lug. Some sellers will happily sell you 18 mm without mentioning this. On a case this small, half a millimetre is a larger proportion of the lug than it sounds — if you want it right, this is one to have made, and we would rather tell you that than take the order.
⚠️ Tank MC: measurements come back at both 25 mm and 26 mm depending on the source, and Cartier's own specification is reported as 26 mm. Our Tank straps stop at 25 mm, so we cannot promise a fit on this one.
⚠️ Tank Française is not on this table. Its case is built differently and we have not verified a fit, so we are not going to imply one.
Crocodile note: our Tank crocodile straps are made in 14, 15, 16 and 17 mm only. That covers the Small Tanks and most vintage ones, but crocodile is not available for the 19 mm Large or the 20 mm and 23 mm Solos.
Calibre de Cartier
| Model | Case | Strap width |
|---|---|---|
| Calibre de Cartier, three-hand | 42 mm | 23 mm |
| Calibre de Cartier Diver | 42 mm | 24 mm |
| Calibre de Cartier Chronograph | 42 mm | 24 mm |
This is the split that catches people most often in the Cartier range, because all three look nearly identical. The three-hand model is the only one at 23 mm. If yours has a rotating dive bezel or chronograph counters, you need 24 mm.
Pasha de Cartier
| Model | Case | Strap width |
|---|---|---|
| Pasha C | 35 mm | 18 mm / 10 mm |
| Pasha | 38 mm | 20 mm / 12 mm |
| Pasha | 42 mm | 21 mm / 15 mm |
The Pasha strap tapers hard — the second figure is the buckle end. That shape is not optional: the lugs sit centrally on a round case and a straight-sided strap will foul them.
⚠️ The Pasha de Cartier relaunched in 2020 uses Cartier's QuickSwitch fitting, which is a different attachment system entirely. Our Pasha straps are made for the classic generation.
Roadster
| Model | Strap width |
|---|---|
| Roadster Ladies | 15 mm |
| Roadster Large | 19 mm |
| Roadster XL Chronograph | 20 mm |
The Roadster uses Cartier's own interchangeable fitting rather than conventional spring bars, so a generic strap of the right width still will not mount. The XL Chronograph is the only Roadster at 20 mm — it is the one with three sub-dials.
⚠️ The Roadster relaunched in 2026 with a redesigned case. Our Roadster straps are cut for the 2001–2012 generation; we have not yet confirmed a fit on the new one.
Ronde de Cartier
Ronde Solo references we have verified take 20 mm. The Ronde family runs several case sizes and we have not measured them all — if yours is not a Ronde Solo, measure before ordering.
Vintage Cartier: measure, don't look up
Everything above applies to modern production. For anything vintage — a Must de Cartier Tank, a vermeil Tank, any pre-2000s reference — there is no reliable table, including ours. Cartier used widths that are not whole millimetres, 15.5 mm and 17.5 mm among them, and dealer listings almost never state them.
We cut every whole millimetre from 14 mm to 25 mm, which covers most vintage Tanks, but not the half sizes. There is a full guide to measuring a vintage Tank properly here: Vintage Cartier Tank strap size guide.
How to measure, in thirty seconds
- Take the strap off, or push it aside so you can see the gap
- Measure the inside gap between the lugs — not the case width, and not the strap already on it, which may be wrong
- Read it at the lug tips, where the strap sits
- Note it to the half millimetre
A digital caliper is ideal; a steel ruler is fine. Any watchmaker will do it for you in seconds.
Why we publish the gaps too
Every strap seller could produce a table like this. Most would fill in the blanks.
We have written individual fitting guides for well over a hundred Cartier references, and the four entries above that say measure are the ones we have not been able to settle to our own satisfaction — because the sources genuinely conflict, or because the case is built in a way that makes a width figure meaningless on its own. Publishing a confident number for those would sell a few more straps this month and generate returns for the next year.
If you know your size, every one of these is cut for the specific case rather than trimmed from a universal pattern — see the full Cartier strap collection, or the individual model guides in the Cartier strap guide index.
More than 50,000 customers worldwide, free shipping and free returns, and no import costs on any order, from any country. Rubber straps carry a lifetime warranty; leather and crocodile are covered for one year.





